Ambers DIY Tips

Get your Project Done Faster with a Power Sander

Sanding is a common part of many projects, especially painting. It helps to get the area prepped and smooth. Using a power sander will get the job done with excellent results in a lot less time. It will save your arms some hard work as well. They are many types of sanders available. Make sure you change the sandpaper or disc often to get the best results and further reduce the amount of time the sanding project takes you.

You want to use one with a high level of power and that fits well in your hand. You may wish to have a large sander for big jobs and a smaller one for small areas and finishing touches. Sanders can be with a cord or cordless. For most jobs, you can sand with and against the grain. Don’t put too much pressure on the sander as you use it. This will only hinder its performance. Keep a firm grip on it but the sanders should be able to move freely. Some sanders offer a warning light that tells you when you are using too much pressure.

A belt sander, just as the name implies, uses a belt to remove the materials. The handles are designed to help you manipulate the power tool without too much pressure on your part. Disc sanders are commonly used for grinding. They require a stone or disc depending on the material you are working with.

Orbit sanders use sandpaper. It comes in a variety of sizes and grades. The grade of sandpaper is determined by the number of sand granules on each square inch of the sand paper. The lower grade numbers mean it is coarser. Higher grade numbers mean the paper is finer. To cut your time down, start with a very coarse sandpaper. As you are about to complete the project switch to finer sandpapers to give you a great finish. Make sure you use the right type of sandpaper for the material you are working with. Sandpaper is very inexpensive so it is a good idea to buy a variety of grades and types to have on hand.

A finish sander is a very small power tool, but it is very efficient. It also uses sandpaper. It is a good type of sander to work for finishing work. A detail sander is your best option for tight corners. It has a triangle shaped tip so it can get in to places other sanders can’t reach.

Sanders result in a great deal of dust particles remaining. Make sure you wear eye protection. A respirator is recommended as well to prevent you from inhaling the dust. This is especially important if you are working at an angle where the dust is coming directly down on you, such as overhead sanding. You can also choose to purchase a dust bag for the sander.

Wearing long sleeves is a good idea as well. Some of the products you may be sanding could have chemicals or the paint could contain lead. These dangerous materials could enter your skin through the pores. Make sure you have a well ventilated work area and that cords and other objects are out of the way.

Sanders are great for getting materials ready to stain or paint. Make sure you thoroughly clean up all the dust before you begin to paint or sand. Any remaining particles of dust from the sanding can get trapped in the paint or stain, and it will be noticeable when your item has finished drying.

Ambers DIY Tips

Factors to Consider when Comparing Power Tools

With the market being saturated with various brands of power tools, it can be a really tough decision to choose the right ones. Here are some basic areas of comparison that you need to take into consideration. They will also help you get the best deals on the power tools you do decide to purchase.

Of course, the purchase price is something we are all going to look at. It doesn’t matter how great of a power tool is, if it is too much for the budget then it can’t even be considered. Most power tools are reasonably priced but you are going to run across some heavy duty, top of the line power tools that have a price tag to reflect it.

Keep in mind the cost is more than just the purchase price. Take the cost of essentials into consideration as well. Depending on the type of power tool, these essentials can be sandpaper, belts, blades, bits, or a number of other items. Optional accessories are also something to consider.

What features are you looking for in a particular power tool? Don’t get caught up in all the features that one has to offer. You may end up paying a great deal more for a power tool that has features you don’t intend to ever us. Take a good look at those features though because you may find a few you could really use that you didn’t think of. That will definitely make a particular model more appealing to you.

Since most power tools are designed to last a very long time, you want to find out about the availability of replacement parts. You also want to find out about customer support. It can be over the phone, by mail, or on the internet. It is important that customer support is available to you in the event you have questions, comments, or complaints about your power tool purchase. Manufacturers who have been in business for a very long time are likely to still be there down the road when you need a replacement part for your power tool.

The quality of a power tool is very important. A good way to compare the quality of a particular type of power tool is to check reviews online from other consumers. These reviews are free to look at and very unbiased. You can also check with magazines that do comparisons such as Consumer Reports. However, you will probably have to pay for a subscription to get this information. Their monthly magazine has features for a variety of products. You can search their archives online to find articles and reviews about power tools.

It is a good idea to purchase a particular model and brand of power tool only after you have physically looked at it and touched it. It is too heavy? Does it seem to flimsy for the job you plan to do with it? How noisy is it? Does it fit properly in your hands? These things are all very important and will affect how compatible the power tool is for you.

Safety should be a top priority on your list when it comes to selecting power tools. What is their safety rating? How many accidents have occurred with a particular model of hand tool? What safety features does the power tool offer you? All power tools on the market have basic safety mechanisms in place, but keep in mind that some only offer the bare minimum as regulated while others go the extra mile to ensure their customers are safe while operating them.

Sometimes walking into a store of power tools is like taking a child into a candy store. However, to get the most from the power tools you purchase, follow these guidelines. Don’t be blind sided by the brand name or the design of a particular power tool. Take the time to find out exactly what it has to offer you.

Ambers DIY Tips

Power Tool Accessories

Having the right power tools always makes and project go smoother and often much faster. You will likely get results that look for professional as well. Most power tools are sold as just the basic item. However, each type of power tool comes with some great accessories. You will want to consider purchasing some of these accessories, especially if you plan to use your power tools often. In some cases, power tools are sold with an accessory kit. This is a great investment as it is often less expensive then purchasing individual accessories.

You may not know what accessories you are going to need down the road for a particular power tool. That can keep you from purchasing the power tool kit with accessories, then you may wish you had them down the road. Take some time to research the power tool you wish to purchase. Find out about the various accessories available and their use.

It is also a great idea to compare the price of the power tool with the accessory kit to the price of it without. If the difference in only a few dollars then get the accessories. If you find you won’t use them, you can always sell them to a friend or one of the online auction sites.

Drill bits are accessories you will have to purchase based on what you will be using the drill for as well as the materials you are drilling. Drill bits made of carbon are only recommended for use on wooden materials. A twisted drill bit and a braided point drill bit are very similar. The difference is the twisted bit is the same diameter throughout it, while a braided point gets thinner towards the bottom.

Countersink drill bits make the hole wider. This allows you to use flathead screws and get them flush with the material. This makes your project look more professional. A tile bit is especially designed for working with anything ceramic or glass. You should only use a tile bit at a very low speed. A chuck key is used to loosen or tighten the chuck. Generally a chuck key comes with your drill when you purchase it. You can by a replacement if necessary.

Routers are great power tools for detailing, carving, and engraving. There are hundreds of different tips for routers to choose from. You will have to do some investigating to purchase ones that will suite your particular project. A router table comes in very handy if you plan to use your router a great deal. It also helps you get the straightest cut.

A pair of saw horses is definitely useful when you are operating any type of saw that involves cutting materials that you can lay across them. They support both ends of the material at the same time so you can use both of your hands to operate the saw. To help you get the best possible cut, a laser guide is a wonderful accessory. It puts out an infrared light in a straight line for you to follow as you cut.

There are various grades of sandpaper to use on sanders. You need to make sure you use the proper grade for each project. A dust bag is an attachment helps to reduce the amount of dust by capturing it and holding it.

You can find power tool accessories at retail stores, on the internet, and at home improvement stores. You will need to purchase accessories that match the brand of power tool you purchased. It is a good idea to have the model number ready when you purchase power tool accessories, especially if it is an older model. There may be more than one type of accessory for a particular power tool and you won’t know which is for yours unless you have the model number to compare with the information on the packaging.